Skip to main content
  • About our bathing waters approach

About our bathing waters approach for 2027

What happens between 15 September and 17 November?

The bathing season may have ended, but there's still important work to do before Scotland's annual bathing water classifications are published.

Throughout the summer, SEPA takes water samples to check for bacteria that can indicate pollution. Individual results are published during the season, helping us understand water quality at local bathing waters.

Once the season ends, we bring together and finalise the monitoring data. We then use this year's results alongside those from previous seasons, normally four years' of information altogether, to calculate each bathing water's classification.

Looking at several years' of results gives us a more reliable picture of water quality over time, rather than relying on individual samples, which can be affected by things like heavy rain.

On 17 November, we'll publish the updated classifications of Excellent, Good, Sufficient or Poor, which will apply for the following bathing season.

Meanwhile, investigations and work with regulated operators and partners to understand and tackle pollution can continue wherever problems have been identified.

What's the difference between water quality predictions, warnings, monitoring results and classifications?

SEPA provide four different types of bathing water information during the bathing water season. Each tells us something different about water quality.

  • Water quality predictions are available at some selected bathing waters during the season. They use forecast and modelled information, including rain, to estimate what water quality is likely to be that day. They are predictions, not direct measurements, and can help people decide whether to swim.

  • Water quality warnings are relatively uncommon and can occur at any bathing water. They are issued when an unexpected event, such as a sewer pipe failure, is considered likely to affect water quality. We may also issue a warning as a precaution while investigating unusually high bacteria results.

  • Individual water quality monitoring results tell us what water quality was like at a particular place and time. We regularly collect samples during the bathing season and analyse them in our laboratories. At most sites, around 18 samples are collected each year. Laboratory analysis takes around 24 hours, so conditions may have changed by the time results are available.

  • Bathing water classifications provide the longer-term picture. Based on monitoring results, normally collected over four years, they show the typical quality of water at a designated bathing water rather than conditions on any particular day.

Water quality can change quickly, particularly following heavy rain. Even an Excellent bathing water can experience short-term pollution, while a site classified as Sufficient or Poor may have good water quality on a particular day.

Looking at all four together helps us build a fuller picture of bathing water quality and make informed decisions about when and where to swim.

Understanding the longer-term picture and what Excellent, Good, Sufficient and Poor mean.

Every year, Scotland's designated bathing waters receive one of four classifications based on monitoring results, normally collected over four years.

These classifications show the longer-term picture of water quality, although they may not represent conditions on any particular day.

  • Excellent: Water quality meets the highest bathing water standards.

  • Good: Water quality meets a high standard, although it doesn't reach the Excellent category.

  • Sufficient: Water quality meets the minimum required standard for bathing waters.

  • Poor: Water quality falls below the required standard, meaning further action is needed to tackle pollution and improve conditions.

Classifications help us understand the general quality of water at their local beach, loch or other designated bathing water. They also help SEPA and its partners identify where improvements are needed and track progress over time.

A classification does not necessarily describe conditions on a single day. Water quality can vary day to day. A bathing water classified as Excellent can experience temporary changes in water quality, particularly following heavy rain, while a site classified as Sufficient or Poor may have good water quality on a particular day.

Why identifying high bacterial levels doesn't automatically identify the source, and how investigations help establish the cause.

Finding high levels of bacteria in a bathing water tells us that water quality has been affected at that location and at that point in time. However, it doesn't necessarily tell us where the pollution is coming from or whether it is a short-term event or an ongoing problem.

Understanding what's causing a problem can take time. There can be several possible sources, including sewage, agricultural run-off and fouling from animals or birds. Heavy rain can also wash pollution from surrounding land into rivers, lochs and coastal waters. If there is more than one contributing source, this can make identifying the causes and finding effective solutions more complicated.

SEPA's investigations involve examining monitoring results and rainfall patterns, looking at potential pollution sources, inspecting sites and working with other organisations to understand how pollution is reaching the water. Specialist scientific techniques can help distinguish between different types of contamination and narrow down potential sources.

That's why investigations and work to address pollution problems don't automatically stop when the bathing water season ends. Understanding the causes is an important step towards making lasting improvements.

Why bathing water monitoring is seasonal, and how work to protect and improve water quality continues throughout the year.

Scotland's statutory bathing water monitoring season runs from 1 June to 15 September, with some pre-season activity beginning on 15 May.

The seasonal programme is designed to assess water quality at designated bathing waters and provide information to people using them during the period when they're most heavily used.

Although routine bathing water monitoring finishes in September, the work to understand and tackle water quality problems continues throughout the year.

Where problems have been identified, SEPA works with organisations including Scottish Water, local authorities, farmers and land managers to tackle pollution and identify improvements.

Depending on the causes, this could involve changes to drainage, wastewater infrastructure, land management practices or compliance with environmental regulations.

Some measures can be delivered relatively quickly. Others require longer-term planning, investment or changes across several organisations.

SEPA also continue to respond to reported pollution incidents throughout the year.

Improving water quality isn't something that happens only during the summer. It's ongoing work, and some of the most important progress happens outside the bathing season.